Giant post 2 and BSC2026 post 3

First off is what I have done with the giant.  Finished cleanup and added the pouch and treasure trousers hanging off his belt.  I removed the hook off the pouch and pinned it in place in two spots.  Then used UV resin around the base to give it more support.  A bit of green stuff was added for a strap on the belt and corresponding strap on the pouch.  The treasure trousers (when you hold the piece upside down it makes sense) had the integeral ring and hook removed and replaced with a new steel ring and hook.  The end of the hook is the first pin point for the piece.  I also hid a second pin on the backside of the trousers to secure it in place.  Again UV resin was used for extra support where it touches and is close to the body.  

 I added an Easter Egg on the base with a 3d printed Tortoises attacking his foot. 

Here is a scale shot with a miniature on a 25mm base. 

 BSC2026.

Added details and controls to the supports for the telescope.  Just needs some gap filling and I can prime.