War Monkey on LAF asked for a step by step on the cavern sections so here it is. Built the basic structure out of foamex and liquid nailed chunks of bark onto the walls and floor. Filled the voids with foam. Glued some 3d printed pieces that will end up textured too.
Made a piping bag out of baking paper. The duct tape is just a ring attached to itself to secure the bag so it does not unravel. Filled with joint filling compound.
Used the bag to put blobs of filler in between the chunks of bark and then used a wet brush to texture the filler.
Once all of the spaces are covered in filler and set I add details such as permanent details and rubble.
Amazing! Would never have thought to use a piping bag.
ReplyDelete