Pretty much finished up. First stage was paint chipping.
Next up came the powders and finished sanding the windsheild.
Hope you like. I will add some photos once I have it on the table.
Total Pageviews
Sunday, February 23, 2020
Sunday, February 16, 2020
Shuttle Alpha 8
The last paint and decals prior to weathering, oils and powers is done. Hope you like.
I will wet sand the wind shield again with the 2500 grit and paint it one more time with Pledge Multi-Surface Polish. For those in the States read Future floor Polish. It is an old scale modeller trick that helps the sanded resin and plastic look clear again.
I will wet sand the wind shield again with the 2500 grit and paint it one more time with Pledge Multi-Surface Polish. For those in the States read Future floor Polish. It is an old scale modeller trick that helps the sanded resin and plastic look clear again.
Friday, February 14, 2020
Shuttle Alpha 7
H have been working on both the interior and exterior. For the interior I decided to do the same thing that I did with the exterior and work outside of my comfort zone.
An exterior shot of the incomplete paintjob and a photo of one of the tails.
Hope you like.
An exterior shot of the incomplete paintjob and a photo of one of the tails.
Hope you like.
Thursday, February 13, 2020
Shuttle Alpha 6
Alpha Shuttle 5
Pretty much finished on the bottom half. Just some small touch ups.
Bottom
With Nacell
Top
With Nacell
Side View
Hope you like.
Bottom
With Nacell
Top
With Nacell
Side View
Hope you like.
Sunday, February 9, 2020
Alpha Shuttle 4
Base coat and masking done on the bottom. It will need touch ups on the white then landing gear bays and thrusters.
Saturday, February 8, 2020
Alpha Shuttle 3
Test painting the engine bells and nacelles. Mostly I was testing the the model masking tape that I used. I will have to pick up some more white paint for touch ups. The pot that I have on hand does not colour match my base paint.
The plan is to paint on some chipping of the paints then several treatments of oils and powders. It will all have to wait until the exterior base painting is complete.
The plan is to paint on some chipping of the paints then several treatments of oils and powders. It will all have to wait until the exterior base painting is complete.
Wednesday, February 5, 2020
Shuttle Alpha post 2
Some more scale shots and pictures of what I need to work on. The ship is heroic 28mm. I will be filing down some faceting on the surface of the ship.
Some of the facets.
Scale
Scale
Scale
Primus marine pointing
More primus marine
Yes he is sexy
Posing in the cockpit.
Pointing at the engine that I am not going to file. I will use the print lines as a guide for my masking to paint.
Engine detail. I feel it needs more inside.
This one too.
More Primus marine on the small engine belle
Marine pointing out faceting that needs sanding out.
More faceting.
Some of the facets.
Scale
Scale
Scale
Primus marine pointing
More primus marine
Yes he is sexy
Posing in the cockpit.
Pointing at the engine that I am not going to file. I will use the print lines as a guide for my masking to paint.
Engine detail. I feel it needs more inside.
This one too.
More Primus marine on the small engine belle
Marine pointing out faceting that needs sanding out.
More faceting.
Subscribe to:
Posts (Atom)