I got a deal on the Amazon for 300 mils of UV resin and decided to see what I could do with it.
The first thing was to try a clear skull coming out of a pool or gateway. I used Oyumaru to make a press mold of a GW giant skull, cast it in clear resin. I textured a ring of foamex as stone and made a backing of crumpled up foil on mount-board.
Once I assembled it I set the skull in the center and then filled around with more resin. This was tinted with a GW ink.
Next I did the same but tinted the resin itself with ink.
I also used some clear Shrinky-dink plastic to make a small skull drawing. I then used a 25mm resin mold to cast that into resin to see how transparent it would be.
As you can see the plastic is still slightly visible.
Then I did another test. This time with a larger drawing of a menacing shadow.
Here it is in the original size.
It baked down to this
This was mounted on clear plastic and set in a doorway. I used inks to add tinting to the plastic, set in resin front and back then textured with Modge Podge.