Total Pageviews

Sunday, November 22, 2026

A rabbit hold I did not intend to go down.

 Afternoon, 

 While perusing the LAF forum I found a post by Fitz about using the Goblin Hobbies stamping system with acrylic paints.  I had seen this a while ago but did not look into it as it looked like it was to be used doing paldrons for 40k and that was something that I would not use. 

I did a bit of a deeper dive after I saw his post and decided to give it a try.    I ordered some nail stamping plates and stamp from Amazon for under £6.  It came with four plates, a scrapper and a one sided application stamp.  

Here are the plates.  (The blue ones still have their protective film on them)





 I tested them out with acrylics and they work a treat.  You just need to be sure to clean the stamp, scrapper and base well as arcrylics can dry in the cracks and ruin detail.  


 While I was down that rabbit hole there were images on amazon about some of the 3d nail art effects that were being sold.  This included a couple of different types of UV resin and small molds.  

I picked up a promising looking mold for £5 and some nail sculpting gel for £6.  The mold is a standard clear silicone mold.  The gel is just really thick UV resin.  After application to the mold, the excess needs to be scraped off and then it is set up with a regular UV light.  The resin is more flexible than other UV resins that I have used but as these details will be added to will provide support.  

Here is the mold and the gel tube.


Here is a picture frame that I cast using it in both normal light and in the UV light to provide some contrast against the background. 


These frames are then glued to backing.  In this case stencil paper.  One thing to note, I found out this stuff does not like superglue.  It will shrink and de-laminate from anything it is glued to.  I used PVA instead. 


 

Once set, the inside and outside of the frame are cut out and the piece is painted.  I then did a small silhouette and glued this to the back of the frame to finish the piece.  

Here are some scale photos.  


All in all, a pretty useful piece of kit.  It is a bit fiddly but so is everything else in the hobby.  

Hope you like. 
 

No comments:

Post a Comment